Shop

Application

All surfaces must be sound, clean, free of oil, waxes, frost, curing agents, form release agents, rust or other bond inhibiting contaminants. All substrates must be clean and dry when application of LATAPOXY 310 Stone Adhesive is made.

Clean and grind back of stone at areas to receive the LATAPOXY 310 Stone Adhesive spots using a mechanical wheel grinder with a diamond wheel/blade. Remove dust with a stiff brush and wipe entire surface. Using a damp sponge (not wet), wipe the tile or stone to remove any particles or remaining dust to ensure a clean direct bond and that all ground material is removed. Wipe dry with a clean cloth, then apply LATAPOXY 310 Stone Adhesive.

MIXING:

Combine equal volumes of LATAPOXY® 310 Stone Adhesive Part A and Part B (1:1 mix). Mix until uniform in color; no swirls. Small quantities can be mixed with a putty knife or margin trowel. Larger quantities can be mixed with an electric drill mixer (low speed).

APPLICATION

Apply dabs evenly distributed on back of the stone or tile; 5 dabs minimum, 1 in each corner and 1 in center. Cover at least 10% of the area of each piece. Finished dab thickness must be a minimum of 1/8″ (3 mm), maximum of 1″ (25 mm).

12″ x 12″ (300 mm X 300 mm) 2″ (50 mm)

24″ x 24″ (600 mm X 600 mm) 4″ (100 mm)

36″ x 36″ (900 mm X 900 mm) 6″ (150 mm)