SEALERS BY BELLINZONI
Bellinzoni Idea HP:- Solvent based clear impregnating agent for protection of buildings and stones against penetration of water, oils, grease and humidity. Optimal performances on polished material, IDEA HP lets the stone breath, does not allow the efflorescence to exit from the stone, it penetrates deeply into the stone, does not change the original color of the stone keeping the original shade; does not make any films but catalyzes into the stone giving a very good protection. Tests carried out in laboratories demonstrate resistance to UV rays. The stone treated does not change its color after long exposure to UV rays. It prevents formation of mildew.
Unit
Surface must be clean and dry; stains, mildew, crusting must be scraped off otherwise they will be harder to remove after protection. Application can be done by brush, by roller or by spray gun. It is suggested, when possible, to apply the product by brush because it allows the product to penetrate better into the stone. Application of IDEA HP by brush, making pressure, will facilitate penetration into frames and cavities. Continuously repeat the application, without interruption, until the stone has been saturated (the stone does not absorb further product).
During the application and subsequent drying, the temperature of the substrate should be between 10 and 30°C. In case of application on floor with underfloor heating system turn off heating and allow the stone to cool completely.
Marble, granite, natural, engineered & artificial stones, terrazzo, marble resin, calcareous stones.
For the protection of polished marble and granite, 1 liter of product can treat 15 to 25 sqm, depending on the absorption and degree of finish of the material. In case of unpolished marble, calcareous stone, limestone, sand stone and concrete with 1 liter of product it is possible to treat 8-15 sqm.
